EverFocus Flex1.0 Manuel d'utilisateur télécharger pdf (Page 34)

The controller generates alarm output(s) according to the settings in the

“Remote Alarm” column

Alarm Setting 3 Tab:

Fig. 4.18 Alarm setting 3 tab

Alarm setting 3 tab shows the relationship between all the alarm outputs and the alarm

inputs that are coming from each reader or door (from door module), such as door

forced open and etc. All the alarm inputs are explained as below:

• Unknown Card:

Unknown card refers to a card that is not recognized by the system. An

Unknown Card event will be generated when an unknown card is presented to

any reader.

The controller generates alarm output(s) according to the settings in the

“Unknown Card” column.

• Expired Card:

Any card in the system can be assigned a valid date. After the valid date passes

the controller will automatically set the card as an expired card. An expired card

cannot gain access to the system. At the same time, an Expired Card event will

be generated if an expired card is presented to a reader.

The controller generates alarm output(s) according to the settings in the

“Expired Card” column.

• Invalid Card:

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 122 123

Pas de commentaire

EverFocus Flex1.0 Manuel d'utilisateur Page 34