EverFocus EDVR 9D1 Manuel d'instructions télécharger pdf (Page 19)

2.4.3 Network System Requirements

Connection type: 100Base-T

Min recommended network bandwidth: 256 K

Max. required network bandwidth: 3 M

Protocol types used: TCP, UDP, SMTP, HTTP, NTP

Required ports: 80, 1600; for port information, please refer to “5.6, Network Setting”.

2.5 SPEED DOME INSTALLATION

Speed dome or pan/tilt/zoom control is available through web browser if the DVR is connected to a network.

Local control is provided by the optional EKB 500 keyboard.

Supported protocols: EverFocus, Pelco-D, Pelco-P, Transparent, Samsung.

Figure 2.3

Sample installation with 3 EPTZ1000 speed domes and EKB500

Required DVR configuration: RS-485 receiver address in CAMERA menu; RS-485 parameters and

protocol in I/O CONTROL menu

ATTENTION: Some Pelco-D / P protocol domes and receivers may require an address offset of -1. In other

words, the address in the DVR’s Camera Menu must be 1 below the address set in the actual dome /

receiver. (example: ID in Device = 3, ID in DVR = 2)

Termination Resistor ON at last dome

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 104 105

Pas de commentaire

EverFocus EDVR 9D1 Manuel d'instructions Page 19