EverFocus EDSR100H Manuel de service télécharger pdf (Page 13)

EKB500_ma_en_rev1.04 13

System settings required for startup:

DVR:

MENU > RS232/RS485:

RS485

BAUDRATE 9600 BPS > Baudrate must be the same as baudrate of

the respective EKB 500 port (default setting

for both keyboard and DVR is 9600)

STOPBIT 1

PARITY NONE

DATABIT 8

RS232/RS485 ID 1 > RS-485 address must correspond to

DVR setting in EKB 500 menu

EKB-500: (for details, please refer to "8. Menu settings")

DVR setting:

MENÜ ("SHIFT" + "MENU" key) > DEVICE SETTING > DVR SETTING:

DVR NAME: Selectable DVR number (independent of RS-485 address)

RS485 CONNECTED TO PORT: _ : RS-485 port to which the DVR is connected (1 or 2)

RS485 Adress: DVR RS-485 address

(complies with DVR menu "RS232/RS485 ID")

Must be in accordance with DVR setting

DVR xxxx changed Press ENTER key to confirm the settings

[ENT] to save

MENÜ > COM PORT SETTING:

Port:_ (1 or 2) Enter the RS-485 port to which the DVR is connected

Input the Port (1 or 2 )

BAUD: 9600< Baudrate setting (according to DVR)

Protocol: EFV1 Protocol type, setting irrelevant for DVR control> ENTER

Port: 1 Changed Press ENTER key to confirm the settings

[ENT] to save

For details and further settings (e.g. matrix monitor setup), please refer to menu description.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 36 37

Pas de commentaire

EverFocus EDSR100H Manuel de service Page 13