EverFocus EDR1620 Manuel d'utilisateur télécharger pdf (Page 18)

1.5 MONITOR DISPLAY

1. Channel tag

2. Event sign

3. Select sign

2. Event sign

4. Play status bar

5. Record status bar

Channel tag: A channel tag indicates the channel name of the screen.

Event sign: Event signals which are small icons with a capital letter and red background show the

events on each screen. There are 4 different signals which are

: Alarm event. The alarm place where the camera locates. In order to show the

camera video to a corresponding alarm, setting a FOCUS CAMERA in ALARM

SETUP MENU is necessary.

: Motion event. Motion event only shows up when the camera’s MOTION is enabled

in MOTION SETUP MENU, and the camera detects a motion.

: Video loss event. Video loss event only shows when the camera’s VLOSS is

enabled in VLOSS SETUP MENU, and the camera signal is lost.

: Sequence sign. Sequence sign shows up when the display is in the sequence mode.

The sequence display is located on display with a “＊” sign in the last display of the screen.

The sign will replace “＊” sign in the display when sequence occurs.

Note: Sequence mode is unavailable only in 16-displays mode.

The status information of the cameras or machine will show up, and be located at different places on the

screen.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 76 77

Pas de commentaire

EverFocus EDR1620 Manuel d'utilisateur Page 18