EverFocus TP-S1016DR Manuel d'utilisateur télécharger pdf (Page 9)

9 of 10 EDR_FW1.6&1.65_release note_en.doc

After updating firmware a loading of factory default settings is needed. IP and user settings will not be

overwritten by loading default values.

> Load Factory Default > APPLY

Confirm with OK.

After successful loading appears following message:

NOTE: The remote firmware update requires a stable and fast network connection. An interrupt in firmware

file transmission may corrupt the DVR. Do not use low bandwidth connections.

PTZ Tab

In mode "Continuous" the PTZ device will move as long, as long the button is pressed.

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

EverFocus TP-S1016DR Manuel d'utilisateur Page 9