EverFocus ECOR960 16F2 Manuel d'utilisateur télécharger pdf (Page 31)

ECOR960 4F2 / 8F2 / 16F2

2.5 Connecting the DVR to the Network

There are three methods to connect the DVR to the network: Router or LAN Connection, Direct

High‐Speed Connection and One‐to‐One Connection. For more information of the network,

please refer to Appendix A. Network Overview.

2.5.1 Router or LAN Connection

This is the most common connection in which the DVR is connected to a router and allows

multiple users on and off site to see the DVR on a LAN/WAN (Internet). The DVR must be

assigned an IP address that is compatible with its LAN. By setting up port forwarding on the

router, you can remotely access the cameras from outside of the LAN via the Internet. To

remotely access the Web interface, please refer to 7. Remote Access to the DVR. To set up

port forwarding, please consult the manual of the router or refer to Appendix B: Linksys &

D-Link Port Forwarding.

Figure 2-21

Straight-through LAN patch cable

Right: Pinout of a straight-through cable.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 148 149

Pas de commentaire

EverFocus ECOR960 16F2 Manuel d'utilisateur Page 31