EverFocus EAN900 Guide d'installation télécharger pdf (Page 4)

EAN900

1. Setting Up the Hardware Connection

1. Mount a lens to the camera. (Megapixel lens recommended for high image

quality.)

2. Connect the EAN900 Network Camera to a PC with a Cat.5 cable.

○,

SD card: Slot to insert SD card.

○,

Video output: Loop through connection to the video signal from the Video In

connector. Terminated with a coaxial/BNC connector.

Note: 1. To see the image of video output, user must press Reset button for

about 35 seconds until the image is showed.

2. When switching to network video output, the camera power must be

○,

○

1 2 3 4 5 6 7 8 9 ... 12 13

Pas de commentaire

EverFocus EAN900 Guide d'installation Page 4