EverFocus EDN Plus Series Manuel d'utilisateur télécharger pdf (Page 11)

EDN Series Mini Indoor IP Dome

2. Unscrew the two screws to remove the cover.

3. Attach and then screw the camera to the wall / ceiling using the supplied two Long Screws.

Tip: Before tightly screwing the camera to the

wall / ceiling, you can pan the camera base by

±25° to the desired angle.

±25

4. Thread the cables.

a. From the side cut of the camera case: remove the plug from the camera case first.

Remove the Plug

b. Through the wall / ceiling: run the cables through the hole on the wall / ceiling.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 69 70

Pas de commentaire

EverFocus EDN Plus Series Manuel d'utilisateur Page 11