EverFocus EDR1620 Manuel d'instructions télécharger pdf (Page 71)

Diagram 3.24

Diagram 3.24 is a screen shot of the SYSTEM SETUP MENU. This menu is for setting up any

additional options and restoring defaults to the digital recorder. In the SYSTEM SETUP MENU the

following fields are defined as follows:

¾ SYSTEM VERSION: Current system firmware version.

¾ SYSTEM VIDEO FORMAT: NTSC or PAL. System can detect the input

signal type automatically from camera 1 while system is booting up. Users do not

need to set it up.

Note: The signal type is detected by the camera 1, so camera 1 input has to be

connected.

¾ LOAD/SAVE CONFIGURATION:

YES: Turn the jog to enter the selection window, there are 4 options available:

CANCEL, DEFAULT, LOAD, and SAVE. Select “CANCEL” for leaving the

existing window. Select “DEFAULT” to load factory default values. Select “LOAD”

to upload and save DVR configuration settings from USB. Select “SAVE” to save

existing DVR configuration settings to USB device. Press “SELECT” button from the

front panel to confirm once the selection is made. Note that a USB device has to be

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 147 148

Pas de commentaire

EverFocus EDR1620 Manuel d'instructions Page 71