EverFocus EHN Series Guide d'installation télécharger pdf (Page 7)

EZN Plus Series

3.3 Adjusting Camera Focus / Zoom

After wiring the cables, you can adjust the camera focus and zoom for better image quality.

1. Follow Steps 1 ~ 3 in 3.2 Inserting a Micro SD Card to remove the camera cover.

2. Connect the power cable of the camera to the power source.

3. Connect a handheld test monitor to the TV-out connector for setting image zoom and

focus.

4. To adjust camera focus, push the Focus / Zoom Control to the left or right. To zoom in /

out the camera, push the Focus / Zoom Control up or down.

Reset

Button

TV-Out

Connector

Focus / Zoom

Control

5. Slide the Sunshield back to the camera body.

Note: When properly installed, the rear-side of the Sunshield should be even with the

rear-side of the camera body. Extending the Sunshield in order to shade the lens will

compromise the image quality.

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

EverFocus EHN Series Guide d'installation Page 7