EverFocus ENR 400 Manuel d'installation télécharger pdf (Page 12)

ENR 400 Installation Manual

12 of 81 ENR400_ma_inst_en_rev01

5.3 Quick Start Setup

This chapter describes the minimum installation steps to install IP-cameras for standard (continuous) recording.

Note: Precondition for this quick start setup is that all IP cameras of the system are installed in the same network

and IP address range as the ENR. The default IP setting of the ENR is DHCP mode with alternative IP

setting (if the network doesn’t support DHCP):

IP: 192.168.1.100

Subnet mask: 255.255.0.0

1. Open camera setup menu >CONFIG > SETTING > tab CAMERA:

After selecting the tab CAMERA, the screen shows the camera setup with an empty camera list.

The camera setup supports 2 methods to install cameras:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 80 81

Pas de commentaire

EverFocus ENR 400 Manuel d'installation Page 12