EverFocus EFC-02-1A Manuel d'utilisateur télécharger pdf (Page 28)

NOTE: Among these four terminals, terminal 9 and 25 are GND, shared by

the door sensor and request-to exit (10 and 26 are your input signals)

Connection to Request-to-Exit

The door module also provides an interface to the request-to-exit button or sensor.

Door 1 is connected to terminals 8-9 and door 2 is connected to terminals 24-25

respectively.

Fig. 2.13 Connecting REX to Controller

Terminals 8 ~9 are for Door 1 and terminals 24~25 are for Door 2 connections.

NOTE: Among these four terminals, terminal 9 and 25 are GND, shared by

the door sensor and request-to exit (8 and 24 are your input signals)

Connection to Fire & Alarm Input 0

The main module provides fire alarm input and one general alarm input (alarm input

0), connecting to terminal 1, 2 and 2, 3 respectively. The GND (terminal is shared by

these two input signals.

Connection to Alarm Input

The alarm signals other than the fire alarm and alarm input 0 are controlled by the

alarm module, which contains 8 alarm inputs and 8 alarm outputs. Using the 5th

channel alarm signal input as an example, the method to connect the alarm module to

the alarm sensor is shown in Fig. 2.14:

(24)

(25)

Door

module

EXIT

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 74 75

Pas de commentaire

EverFocus EFC-02-1A Manuel d'utilisateur Page 28