EverFocus EDR1620 Manuel d'instructions télécharger pdf (Page 66)

3.11.2 HDD TEMP

In HDD TEMP, we define:

Diagram 3.21

¾ BUZZER: HDD TEMPERATURE buzzer.

ENABLE: To enable a buzzer when HDD’s temperature is higher than the

temperature set in “SET TEMPERATURE”.

DISABLE: To disable HDD TEMP. Buzzer.

¾ ALARM OUTPUT: This will transmit a signal to another device. The setting of

alarms are NONE = not activated, 1 = output signal 1 transmitted, 2 = output signal 2

transmitted, 3 = output signal 3 transmitted and 4 = output signal 4 transmitted. To

change this, simply use the Jog Dial on the DVR to make your selection.

¾ ALARM DURATION: Permanent

¾ NETWORK ALARM:

YES: To enable network alarm.

NO: To disable network alarm.

¾ SEND EMAIL:

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 147 148

Pas de commentaire

EverFocus EDR1620 Manuel d'instructions Page 66