EverFocus EDR-1610A Spécifications

INSTALLATION / OPERATION EDR-910A 9-channel Digital Video Recorder EDR-910D 9-channel Digital Video Recorder with internal DVD-RW drive EDR-

EDR910_1610_ma_en_rev1 00 - 10 -1.5 CONNECTIONS (1) Main switch: Power switch, below IEC socket for 100~240 VAC power source (2) MAIN monitor:

EDR910_1610_ma_en_rev1 00 - 11 -1.6 SCREEN DISPLAYS Here’s an overview of the screen displays appearing on the MAIN monitor: (1) Channel displ

EDR910_1610_ma_en_rev1 00 - 12 -(3) SELECT: Within a multiscreen view, the SELECT key activates the camera selection mode. The active camera field s

EDR910_1610_ma_en_rev1 00 - 13 -INSTALLATION 2. INSTALLATION ATTENTION: The installation should be effected by qualified personnel only. Connect po

EDR910_1610_ma_en_rev1 00 - 14 - 2.3 RS-485 keyboard installation All EDR910/1610 functions can be remote-controlled by the EKB 500 universal key

EDR910_1610_ma_en_rev1 00 - 15 -If star wiring is inevitable, EDA 997A RS-485 signal distributors may be used. The maximum system cable length can al

EDR910_1610_ma_en_rev1 00 - 16 -2.3.2 RS-485 plug connection assignment The two RS-485 input RJ-45 plugs are looped through and pin-compatible. The

EDR910_1610_ma_en_rev1 00 - 17 -2.3.4 EKB-500 connection to several DVRs For long distance installations connecting several DVRs, the use of the o

EDR910_1610_ma_en_rev1 00 - 18 -2.4 Speed dome installation Speed dome or telemetry receiver pan/tilt/zoom control is available through web browser

EDR910_1610_ma_en_rev1 00 - 19 -2.5 Alarm input / output installation The EDR910/1610 alarm inputs can be used for recording start or recording rat

EDR910_1610_ma_en_rev1 00 -2 -Safety warnings Safety warnings To avoid any damage, please consider the following safety warnings: Never place t

EDR910_1610_ma_en_rev1 00 - 20 -2.6 PS/2 mouse installation EDR910/1610 may optionally be controlled through USB wheelmouse which must be connected

EDR910_1610_ma_en_rev1 00 - 21 - 2.7.3. Network system requirements Connection type: 100Base-T Max. required network bandwidth: 10 MBit Protocol

EDR910_1610_ma_en_rev1 00 - 22 -2.8 IR remote control extension The optional IR remote control EDA966 has a range of ~10m within the range of vision

EDR910_1610_ma_en_rev1 00 - 23 -SETUP MENU 3. SETUP MENU All EDR DVR settings are carried out in the on-screen display. The MENU key starts

EDR910_1610_ma_en_rev1 00 - 24 -3.1 TIME / DATE MENU Define the following settings in the TIME / DATE menu: (1) TIME FORMAT: Select either 12

EDR910_1610_ma_en_rev1 00 - 25 -(7) END DATE: End of daylight saving time Select month: Use the JOG to adjust the month: Select week: Use

EDR910_1610_ma_en_rev1 00 - 26 -(10) TIME ZONE: Enter your local time zone (Germany, Austria, Switzerland: GMT+1). ATTENTION: The correct entry is

EDR910_1610_ma_en_rev1 00 - 27 -3.2 CAMERA MENU Menu display for EDR-910, EDR1610 identical, but with 16 cameras. The most important recording o

EDR910_1610_ma_en_rev1 00 - 28 -(5) REC QUALITY: Individual recording quality setting for this camera (within the resolution defined in RECORD

EDR910_1610_ma_en_rev1 00 - 29 -(7) SUMMARY: The SUMMARY menu item gives a summary on the settings for control purpose. Use the JOG to browse

EDR910_1610_ma_en_rev1 00 -3 -TABLE OF CONTENTS Safety warnings ...

EDR910_1610_ma_en_rev1 00 - 30 -3.3 RECORDING MENU Define the following settings in the recording menu: (1)TIME STAMP: ON: Recording is over

EDR910_1610_ma_en_rev1 00 - 31 -3.4 ALARM MENU Define the dry alarm contacts’ attributes and the alarm reactions in the ALARM menu. For alarm c

EDR910_1610_ma_en_rev1 00 - 32 -(4) DURATION: Alarm duration for N.O. and N.C. contact types. Duration applies to recording, screen change, buzzer

EDR910_1610_ma_en_rev1 00 - 33 -3.5 MOTION DETECTION Define all motion detection settings for the individual cameras in the MOTION DETECTION menu.

EDR910_1610_ma_en_rev1 00 - 34 -(5) EMAIL: By selecting “ON”, an email is sent in case of motion alarm, containing the alarm message, the camera’s a

EDR910_1610_ma_en_rev1 00 - 35 -DISPLAY KEY FOR HELP (11) AREA SETUP With activated motion detection, the sub menu for setting up detection areas

EDR910_1610_ma_en_rev1 00 - 36 -3.6 VIDEO LOSS MENU Define the reaction upon video signal loss for each camera in this menu: (1) VLOSS: ENABL

EDR910_1610_ma_en_rev1 00 - 37 -3.7 NETWORK MENU Define all network-related settings in this menu. These settings should only be carried out by s

EDR910_1610_ma_en_rev1 00 - 38 -(6) MULTICAST: If the DVR is connected to a server system, which provide Multicast mode, settings for this mode can

EDR910_1610_ma_en_rev1 00 - 39 -(1) PROTOCOL: Network alarm transmission protocol type TCP: TCP protocol transmission UDP: UDP protocol tra

EDR910_1610_ma_en_rev1 00 -4 -6. VIDEO EXPORT ...- 58 - 7. CALL

EDR910_1610_ma_en_rev1 00 - 40 -3.7.3 EMAIL (Email alarm) Define the recipiant’s email account settings for email alarm in the EMAIL menu item. E

EDR910_1610_ma_en_rev1 00 - 41 -Define user names, passwords and user rights for network access in the PASSWORD menu item. Up to 6 different users ca

EDR910_1610_ma_en_rev1 00 - 42 -3.7.6 DDNS The domain name system (DNS) is the technology used that allows an Internet domain name to be translat

EDR910_1610_ma_en_rev1 00 - 43 -3.8 TIMER MENU Define the time frames for scheduled recording in the TIMER menu: (1) DAY: MO (M

EDR910_1610_ma_en_rev1 00 - 44 -3.9 DISK - HDD (harddisk) MENU Check harddisk status and delete harddisk indexes in the HDD menu. (1) DISK VIDE

EDR910_1610_ma_en_rev1 00 - 45 -3.10 RS232/RS485 MENU Define the settings for DVR remote control through serial interface in the RS232/RS485 menu.

EDR910_1610_ma_en_rev1 00 - 46 -3.11 WARNING MENU The EDR provides warning functions allowing signalling upon operation failure. Define the alarm r

EDR910_1610_ma_en_rev1 00 - 47 -3.11.2 HDD TEMP. The enduring HDD temperature surveillance guarantees an alarm reaction in case the threshold valu

EDR910_1610_ma_en_rev1 00 - 48 -3.11.3 NO HDD The DVR detects when both harddisks are removed, switched off or not detected. Define the alarm reac

EDR910_1610_ma_en_rev1 00 - 49 -3.11.4 HDD FULL In operation mode HDD FULL: STOP (setting in RECORDING menu), the recording process is stopped if

EDR910_1610_ma_en_rev1 00 -5 -INTRODUCTION 1. INTRODUCTION The latest EverFocus digital video recorder generation is based on MPEG-4 compression te

EDR910_1610_ma_en_rev1 00 - 50 -3.12 SYSTEM MENU Define the following settings in the SYSTEM menu: (1) SYSTEM VERSION: Display of the installed

EDR910_1610_ma_en_rev1 00 - 51 -(5) LANGUAGE: System language selection. (6) QUICK PLAY: The "QuickPlay" function is a convenient playba

EDR910_1610_ma_en_rev1 00 - 52 -RECORDING 4. RECORDING 4.1 RECORDING ATTENTION: The following instructions as regard to the EDR DVR recording and

EDR910_1610_ma_en_rev1 00 - 53 - 4.3 Event recording If event-triggered recordings are programmed in the ALARM and/or MOTION menu, the respective

EDR910_1610_ma_en_rev1 00 - 54 - PLAYBACK 5. PLAYBACK 5.1 PLAYBACK WITHOUT SEARCH FUNCTION (1) Playback Press the PLAY key to switch the DVR to

EDR910_1610_ma_en_rev1 00 - 55 -(4) Slow forward playback PAUSEPAUSE Press the PAUSE key during playback to freeze the image at the current playbac

EDR910_1610_ma_en_rev1 00 - 56 -5.2 PLAYBACK SEARCH SEARCHSEARCH Press the SEARCH key to enter the search menu. NAVIGATION: Use the JOG to selec

EDR910_1610_ma_en_rev1 00 - 57 -(2) EVENT SEARCH Enter EVENT in the first row of the search menu if you search for specific events such as alarm, mo

EDR910_1610_ma_en_rev1 00 - 58 -COPYCOPYVIDEO EXPORT 6. VIDEO EXPORT Video data can be exported as *.arv format movie file to both a USB stick or t

EDR910_1610_ma_en_rev1 00 - 59 - DEVICE : USB / DVD Selection of export medium USB: Export to USB - Stick or external DVD-RW drive (EPR200)

EDR910_1610_ma_en_rev1 00 -6 -1.3 TECHNICAL DATA Video format PAL Video input EDR 910: 9 x 1 Vpp FBAS, BNC, 75 Ohm EDR 1610: 16 x 1 Vpp FBAS, BNC

EDR910_1610_ma_en_rev1 00 - 60 -CALL MONITOR SETUP 7. CALL MONITOR SETUP Enter the call and matrix monitor setup menu by pressing the CALL key:

EDR910_1610_ma_en_rev1 00 - 61 -DISPLAY SETTINGS 8. DISPLAY SETTINGS 8.1. BRIGHTNESS, CONTRAST, COLOUR Press SELECT to adjust brightness, contrast

EDR910_1610_ma_en_rev1 00 - 62 -SCREEN DISPLAY 9. SCREEN DISPLAY Press the MODE key to switch between 4x, 7x, 9x, 10x, 13x, 16x and PiP (Picture-i

EDR910_1610_ma_en_rev1 00 - 63 -EDA 966 INFRARED REMOTE CONTROL (OPTIONAL) 10. EDA 966 INFRARED REMOTE CONTROL (optional) The optional EDA966 IR re

EDR910_1610_ma_en_rev1 00 - 64 -NETWORK ACCESS 11. NETWORK ACCESS WITH INTERNET EXPLORER 11.1 PC SYSTEM REQUIREMENTS: Operating system Windows XP S

EDR910_1610_ma_en_rev1 00 - 65 -11.3 ACCESS VIA INTERNET EXPLORER Enter the DVR IP address in the Internet Explorer address line: Enter user name

EDR910_1610_ma_en_rev1 00 - 66 -11.4 SCREEN ELEMENTS The illustration shows the screen user interface with the following icons and operating elemen

EDR910_1610_ma_en_rev1 00 - 67 -11.5 PLAYBACK SEARCH Select search mode either by time/date or by event list. Event list search mode Select the

EDR910_1610_ma_en_rev1 00 - 68 -TIME / DATE SEARCH Selecting "Search by Time" opens an entry mask for playback position date and time

EDR910_1610_ma_en_rev1 00 - 69 -11.6 PTZ CONTROL The EDR DVR allows the speed dome and PTZ device control via network. Select “PTZ” to activate t

EDR910_1610_ma_en_rev1 00 -7 -Power consumption 50 W max. Dimensions 430 (W) x 72 (H) x 402,5 (D) mm Weight 6,42 kg Ambient temperature 0°C ~ +40

EDR910_1610_ma_en_rev1 00 - 70 -5. Focus: manual focus NEAR: near range, FAR: tele range 6. IRIS: manual iris control OPEN:

EDR910_1610_ma_en_rev1 00 - 71 -11.7 REMOTE ARCHIVING This function allows to export a video file of a single camera in original *.arv - file form

EDR910_1610_ma_en_rev1 00 - 72 -3. Enter Month, Day, Hour, Minute, and second directly in display bar. Press OK to enter the settings. Press ARC

EDR910_1610_ma_en_rev1 00 - 73 -OPERATION DVR VIEWER Detailed explanation of DVRViewer is as follows: 1. Load File: to load the archived EDR MPE

EDR910_1610_ma_en_rev1 00 - 74 - APPENDIX A: Interface specification INTERFACE SPECIFICATION 1. RS-232 Pin assignment The RS232 interface of EDR161

EDR910_1610_ma_en_rev1 00 - 75 -APPENDIX B: Remote control protocol Remote control protocol The following remote control protocol applies to RS485

EDR910_1610_ma_en_rev1 00 - 76 -2-3. Receiver ID 1.) Individual receiver ID Decimal 14bit binary value Hbyte Lbyte Receiver ID (EDSR) 0 0000

EDR910_1610_ma_en_rev1 00 - 77 -2-4. Opcode Byte & Data bytes 2-4-1. OPcode OPcode Data1 Function 0x4B Keycode A remote key pressed

EDR910_1610_ma_en_rev1 00 - 78 -2-4-3. Matrix command (OPcode=0x4D) 2-5. Checksum Byte Checksum is computed as the

EDR910_1610_ma_en_rev1 00 - 79 -APPENDIX C: Recording times Average recording times, based on 100GB harddisk capacity. Using the VBR (Variable Bit

EDR910_1610_ma_en_rev1 00 -8 -1.4 FRONT PANEL OPERATING ELEMENTS Keys (1) REC: recording key (2) STOP: recording / playback stop (3) PLA

EDR910_1610_ma_en_rev1 00 - 80 - APPENDIX D: NERO InCD Formatting For video export to DVD+RW media, formatting the media to UDF format is mandatory.

EDR910_1610_ma_en_rev1 00 - 81 - Please insert DVD-RW to DVD burner, open My Computer window, right-click on DVD burner, then choose InCD Format. F

EDR910_1610_ma_en_rev1 00 - 82 -Choose “UDF 1.50” in the following window and click OK to return to the format setting window. Please choose “Fo

EDR910_1610_ma_en_rev1 00 - 83 - EverFocus Electronics Corp. Headoffice: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan www.everfocus

EDR910_1610_ma_en_rev1 00 -9 -(11) ZOOM: In full screen mode: 2x electronical zoom. Zoom screen can be moved through JOG. ENTER key changes the dir