EverFocus eDR1680 Series Manuel d'instructions télécharger pdf (Page 8)

Simple One to One Connection

Crossover Ethernet Cable Pin outs:

The Diagram below shows the pin configurations for a cross over cable.

Diagram 31

Connection Procedure:

¾ The First step is to purchase or make a cross over cable. We recommend

purchasing one if you have never made a cross over cable. Please

remember you can not use a straight through network cable for this

application

¾ Once you have a cross over cable plug one end into the LAN port on the

back of the recorder and the other into the network card on the back of

the computer.

¾ Now Log into the Everfocus DVR menu and using the jog dial from the

previous chapter go to the Network Setting Menu. (See page 28 for more

instructions)

Cat 5

Cross-over-cable

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Pas de commentaire

EverFocus eDR1680 Series Manuel d'instructions Page 8