EverFocus EDSR400M Manuel d'instructions télécharger pdf (Page 24)

INSTALLATION

(1) Insert a HDD (IDE) for Video Storage

(2) Connect cable for video/audio input and video/audio out,

The detail connection is described in SYSTEM CONNECTION.

(3) Switch Power On

The POWER LED lights if power is normal.

(4) Press MENU key to enter SET UP MENU.

Once inside the main menu you will find there are

13 set up pages as below:

(5) Turn the Jog dial clockwise or counterclockwise to change set uppage.

1. CLOCK/LANGUAGE SETTING MENU

2. TITLE SETTING MENU

3. DAYLIGHT SAVING SETTING MENU

4. TIMER SETTING MENU

5. NORMAL RECORD SETTING MENU

6. ALARM RECORD SETTING MENU

7. BUZZER SETTING MENU

8. ARCHIVE SETTING MENU

9. NETWORK SETTING MENU

10. SEQUENCE SETTING MENU

11. RS232/RS485 SETTING

12. MOTION RECORD SETTING MENU

13. SYSTEM SETTING MENU

5. Installation

Insert a HDD(IDE) for Video Storage

The HDD should be set as MASTER.

(Normally the default setting of HDD is Master)

Note: After hard disk case is inserted into the hard disk tray, be sure to turn the tray key in lock position.

Otherwise, HDD will not be detected.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

Pas de commentaire

EverFocus EDSR400M Manuel d'instructions Page 24