EverFocus ENVS1600 2TB Manuel d'installation télécharger pdf (Page 21)

ENVS800 / ENVS1600 / ENVS3200 Installation Manual

21 of 115

Recycle Range: interval (1h to 1 day), how often NVR checks to delete old records

Keep Video: If checked, the NVR will delete video data after a defined time period. If not

checked, the NVR will use the full HDD capacity to achieve the maximum recording time.

If recording shall start automatically upon application start, mark the checkbox SCHEDULE

RECORDING SYSTEM under START-UP.

Confirm all settings with OK.

With these basic settings the NVR is configured for continuous recording. For more detailed

settings including schedule and event management refer to the following section DETAILED

SETUP.

Finally choose the START button from the main window and choose START RECORDING

SCHEDULE to activate recording. The menu is context sensitive, so if recording is already

enabled, the menu choice will be ‘Stop Recording Schedule’.

The system is now set to record; recording status is indicated by a red dot in the upper right

on each recording video channel.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 114 115

Pas de commentaire

EverFocus ENVS1600 2TB Manuel d'installation Page 21