EverFocus EDSR100H Manuel de service télécharger pdf (Page 26)

EKB500_ma_en_rev1.04 26

9.2. SPEED DOME / TELEMETRY RECEIVER OPERATION / SETUP

The operation of speed domes and telemetry receivers requires the setup of these devices in the EKB 500

menu. Settings within the following menus have to be adjusted:

MENU > COM PORT SETTING for interface and protocol type setting

MENU > DEVICE SETTING > CAMERA SETTING for speed dome / telemetry receiver connection

settings

EKB 500 is optimised for EverFocus EPTZ series speed dome control. Furthermore, basic functions of

other supported speed dome types can be operated.

The following operating elements are available for camera control:

General key description:

TRACK AUTO/HOLD: reserved for future applications

IRIS + / -: manual iris control, + opens iris, - closes iris

FOCUS F. / N.: manual focus, F. TELE; N. WIDE

ZOOM IN / OUT: Zoom keys, same function as joystick rotation, IN = TELE, OUT = WIDE

POSITION: start and save positions

TOUR: start and save preset tours

A.PAN: autopan, start and save automatic pan operation

STOP: function key for programming termination

SET: switch key for second key level (depending on function)

HOME: start and save home position

SHIFT: switch key for second key level (depending on function)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

Pas de commentaire

EverFocus EDSR100H Manuel de service Page 26