EverFocus EDN Series Manuel d'utilisateur télécharger pdf (Page 12)

EDN2160/2260/2560

3. Drill the two marks and insert the supplied two Screw Anchors into the anchor holes. Then, screw

the Mounting Plate to the wall / ceiling.

Screw Anchors

Wall / Ceiling

Long Screws

Mounting Plate

4. Thread the cables from the side cut of the camera or through the wall.

a. To thread the cables through the wall / ceiling:

(1) Drill a hole on the upper-left side of the Mounting Plate.

Mounting Plate

Drill a Hole

(2) Run the cables through the hole and then slide the camera into the Mounting Plate.

Wall /

Ceiling

Cables

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 72 73

Pas de commentaire

EverFocus EDN Series Manuel d'utilisateur Page 12