EverFocus EDN Series Manuel d'utilisateur télécharger pdf (Page 35)

EDN2160/2260/2560

7.1.2.2 Network Setting

You can configure the networking setting on this page. By default, the camera uses DHCP to assign

IP address. Click Apply to apply the changes or Cancel to cancel the changes and return to the

previous settings.

【Network Setting】

Network Type:

 DHCP: This setting lets the camera use an automatically assigned (dynamic) IP address. This

address can change under certain circumstances. For instance, when the camera’s network

switch/hub has to be rebooted. Do not assign to the DHCP server the same IP addresses used

for the other network cameras and PCs with unique IP addresses.

 Static IP: The user can manually set the Static IP address. This type of address is stable and

cannot change, but the user has to make sure there are no address conflicts with other

network-connected devices.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 72 73

Pas de commentaire

EverFocus EDN Series Manuel d'utilisateur Page 35