EverFocus EDR1620 Manuel d'instructions télécharger pdf (Page 19)

The status information of the cameras or machine will show up, and be located at different places

on the screen.

Channel tag: A channel tag indicates the channel name of the screen.

Event sign: Event signals which are small icons with a capital letter and red background show

the events on each screen. There are totally 6 different signals which are:

Alarm event. The alarm place where the camera locates. In order to show the camera video to

a corresponding alarm, setting a FOCUS CAMERA in ALARM SETUP MENU is necessary.

Motion event. Motion event only shows up when the camera’s MOTION is enabled in

MOTION SETUP MENU, and the camera detects a motion.

Video loss event. Video loss event only shows when the camera’s VLOSS is enabled in

VLOSS SETUP MENU, and the camera signal is lost.

Sequence sign. Sequence sign shows up when the display is in the sequence mode.

The sequence display is located on display with a “Ϡ” sign in the last display of the screen.

The sign will replace “Ϡ” sign in the display when sequence occurs.

2. Event si

4. Pla

status ba

5. Record status ba

1. Channel ta

2. Event si

3. Select si

Note: Sequence mode is unavailable only in 16-displays mode.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 147 148

Pas de commentaire

EverFocus EDR1620 Manuel d'instructions Page 19