EverFocus ERS-871 Manuel d'instructions Page 1

Instruction Manual EEvveerrAAcccceessss DDeesskkttoopp RReeaaddeerr EERRSS--887711 Volume 1 EverAccess

4 Wiring the RJ45 Port (RS485 Bus) The pins on the RJ45 connector, from left to right, are RS485-B, RS485-A and GND. Connect these three pins with th

5 3. The device manager dialog box will appear. Expand the node of “Ports (COM & LPT). “Prolific USB-to-Serial Comm Port” is mapped to the des

6 Install the Windows Driver In order for the desktop reader to be recognized by the computer, the driver must be installed. Before installing the d

7 2. Click the “next” button. 3. Click the “Finish” button to confirm. 4. Click the “Finish” button again to restart the computer.

8 Uninstall To uninstall the driver, run the same installation program (PL-2303 Driver Installer.exe). Check “Uninstaller driver” and click “Next”

9 Notes

Head Office European Office 12F, No.79 Sec.1 Shin-Tai Wu Road,

EVERFOCUS ELECTRONICS CORPORATION ERS-871 Instruction Guide © 2004 Everfocus Electronics Corp 1801 Highland Ave Duarte CA 91010 Phone 626.844.8888 •

Table of Contents CHAPTER 1 Product Overview 1 Features 1 Parts List 2 Specifications 2 Desktop Reader Layout 3 CHAPTER 2 Installation 4 Wiring th

1 Product Overview The EverAccess desktop reader, ERS-871, incorporates state-of-the-art technology, reliable performance, easy-to-use features, and

2 Parts List Please be careful when you unpack the box due to the electronics devices inside. Check and make sure that you have all the items below i

3 Desktop Reader Layout The figure below shows the top view of the desktop reader. The purposes of four LEDs are given in the figure. EverAccessRXTX

4 Installation The EverAccess desktop is easy to install. A large-size RS485 bus based access control system can be established with a desktop reader