EverFocus EVS200A Manuel d'utilisateur télécharger pdf (Page 43)

EVS200A/AW

4.8.4 Serial Communication

RS485 Setting

Baud Rate: This field is to set the speed at which is used to transmit instruction or

information through the RS485 port on the camera. There are six different speeds,

2400/4800/9600/19200/38400/57600. (Default: 9600)

Data Bit: This field is the data bit at which you will be transferring. There are two

settings for this option: 8 or 7. (Default: 8)

Stop Bit: This field is to set the stop bit for the RS485 connection. There are two

different stop bits, 1 or 2. (Default: 1)

Parity: This field is to select the parity level at which you will be connected. You can

choose between None, Odd, or Even parity levels. (Default: none)

Press Apply to apply the setting changes or Reset to reset without saving the change.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Pas de commentaire

EverFocus EVS200A Manuel d'utilisateur Page 43