EverFocus EDN Plus Series Guide d'installation télécharger pdf (Page 5)

EDN Plus Series

4. Unscrew the three screws and take out the camera body.

5. Thread the cables on the side of the camera case. If you want to wire the cables through the

wall, run the cables through the hole at the bottom.

Side Hole

Bottom Hole

6. If you run the cables through the bottom hole in Step 5, screw the circle plate on the side hole

for waterproofing. You can simply tighten the circle plate using a coin.

Circle Plate

7. Secure the camera case to the wall using the supplied four long screws.

1 2 3 4 5 6 7 8 9 10 ... 13 14

Pas de commentaire

EverFocus EDN Plus Series Guide d'installation Page 5