EverFocus ECOR960 X1 Manuel d'utilisateur télécharger pdf (Page 71)

ECOR960 X1

6.2.3 Motion

You can enable the Motion Event function and configured the related settings including

motion event notifications and motion areas in this menu.

Figure 6-5

Camera: Select a camera to be configured.

Enable: Check the box to enable the Motion Event settings for the selected camera.

Log: Check the box to record motion events to log data.

Pre-alarm Record: Check the box to start copying the recordings to the hard disk from 5

seconds before the motion event occurs. Note that the pre-alarm recording rate will follow

the Normal Speed configured in the above section (see 6.2.1 Basic Setting).

Buzzer: Check the box to enable the buzzer when a motion event is triggered.

Email Notify: Check the box to send email notification when a motion event is detected. Email

operation requires valid email entered in the Email setup menu (see 6.6.2 Email).

Network Alarm: Check the box to send out a network alarm to a client PC when motion

occurs. This feature works with EverFocus’ CMS software, PowerVideo Plus. You will need to

configure the Alarm Server for the DVR to send network alarms to the client PC (see 6.6.4

Alarm Server).

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 148 149

Pas de commentaire

EverFocus ECOR960 X1 Manuel d'utilisateur Page 71