EverFocus ECOR960 X1 Manuel d'utilisateur télécharger pdf (Page 97)

ECOR960 X1

4. Change the section to different mode (with a different color) by clicking on the first

block of the section. The color switches from gray -> orange -> gray, every time user

clicks the first block of a section. Orange indicates ‘alarm action recording ON’.

5. To set the end of a timezone, select the time block following the end of the timezone

defined in the step above. The first click will highlight the block in blue. A second click

will toggle the state/color of that block and the remainder of the time bar, ending the

above defined timezone

Alarm Action Setting from front panel

1. Enter Alarm Action setting mode: highlight the “Alarm Action: menu choice and press

the “Enter” button to enter Alarm Action setting mode. At this time, the whole editing

area at the right side will be highlighted with a blue frame.

Figure 6-33

2. Enter alarm selection mode: Use the Jog wheel to switch to Alarm selection mode. The

Alarm channel will be highlighted with a blue frame.

Figure 6-34

3. Selecting alarm: Use the Shuttle wheel to select an alarm number to be configured.

Selected alarm number will be highlighted with a blue frame.

Figure 6-35

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 148 149

Pas de commentaire

EverFocus ECOR960 X1 Manuel d'utilisateur Page 97