EverFocus ECOR960 X1 Manuel d'utilisateur télécharger pdf (Page 98)

ECOR960 X1

4. Enter time bar editing mode: Use the Jog wheel to switch to time bar editing mode. The

area surrounding the time bars will be highlighted with a blue frame.

Figure 6-36

5. Select desired time bar for setting: Press the Enter button, the first time bar will be

selected and highlighted with a red frame. Use the Jog wheel to choose the desired time

bar for setting.

Figure 6-37

6. Editing blocks in a time bar: Press the Enter button to select that time bar for

configuration; then the first block of this bar will be selected (highlighted with a blue

frame). Use the Jog wheel to move to the desired block for the starting time, and press

the Enter button again to confirm. At this time, the current and all following blocks will

turn into gray, which means this gray timezone has been set to the recording mode of

gray (Alarm Action off). User can also change the timezone to a different record mode by

following the instructions in the next step.

Figure 6-38

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 148 149

Pas de commentaire

EverFocus ECOR960 X1 Manuel d'utilisateur Page 98