EverFocus EDVR 16D1 Manuel d'instructions télécharger pdf (Page 63)

5353

3.11.3 NO HDD

Diagram 3.21

In NO HDD, we define:

1. BUZZER: NO HDD buzzer.

ENABLE: To enable a buzzer when no HDD is detected.

DISABLE: To disable NO HDD buzzer.

2. ALARM OUTPUT

This will transmit a signal to another device. The setting of alarms are NONE = not

activated, 1 = output signal 1 transmits, 2 = output signal 2 transmits, 3 = output

signal 3 transmits and 4 = output signal 4 transmits. To change this, simply use the

Jog Dial on the DVR.

(Only EDVR16D3 model has 4 alarm outputs. All others have only 1 alarm output).

3. ALARM DURATION

The length of time the buzzer remains active. This can be set from 1 sec to 99 seconds or

permanent. The default value is 5 seconds.

4. NETWORK ALARM

YES: To enable network alarm.

NO: To disable network alarm.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 154 155

Pas de commentaire

EverFocus EDVR 16D1 Manuel d'instructions Page 63