EverFocus Paragon264 1TB Manuel d'instructions télécharger pdf (Page 102)

6.7 Simple One to One Connection

Crossover Ethernet Cable Pin outs:

The Figure below shows the pin configurations for a cross-over cable.

Connection Procedure:

 The First step is to purchase or make a cross-over cable. We recommend purchasing one if you

have never made a cross-over cable. Please remember you can not use a straight through network

cable for this application

 Once you have a cross-over cable plug one end into the LAN port on the back of the DVR and the

other into the network card on the back of the computer.

 Log into the EverFocus DVR menu and go to the Network Setting Menu.

 You must use the Static IP option for this type of connection.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 133 134

Pas de commentaire

EverFocus Paragon264 1TB Manuel d'instructions Page 102