EverFocus Paragon264 1TB Manuel d'instructions télécharger pdf (Page 90)

5.10 SYSTEM SETTING

Figure 5-34

is a screen shot of the SYSTEM SETTING MENU. This menu is for setting up the system

configurations of the DVR.

Figure 5-34 System Menu – Date/Time

5.10.1 Date/Time

Date: Set current Date.

Time: Set current Time.

Date Format: Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.

Time Format: Change time format between 12H and 24H mode.

Time Zone: Set the time zone that the DVR adjusts to when updating from the time server.

NTP: Select “Enable” or “Disable” NTP time synchronization.

NTP Server: Displays the time server address that the uses for time synchronize. To find a compatible

NTP address, please follow these steps:

a) Go to a PC that is connected to the internet.

b) Click on “START” -> “RUN” -> type “command” and press “OK”.

c) In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.

NTP Update Interval: The frequency that the system automatically updates the time. Select Daily, Weekly,

or Monthly.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 133 134

Pas de commentaire

EverFocus Paragon264 1TB Manuel d'instructions Page 90