EverFocus EMV200 DVR Manuel d'utilisateur télécharger pdf (Page 50)

4.6.4 Sequence

Click button to set up Sequence parameters.

Figure 4-29 Display-Sequence

Step: Sequence order. For reference.

Camera: Select which camera appears in the current step.

Dwell (sec): Set the dwell time for each step. Sequence dwell time can be set from 0 to 99 seconds.

Sequence repeats continuously from steps 1 through 20 until interrupted.

Click button to return to the previous level of menu.

4.7 NETWORK SETTING

Figure 4-30 is a screenshot of the NETWORK SETTING MENU. This menu is for configuring the DVR for a

network connection.

NOTE: Since every Network Configuration is different, please check with your Network Administrator or ISP to

see if your DVR should use specific IP addresses and/or port numbers.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 101 102

Pas de commentaire

EverFocus EMV200 DVR Manuel d'utilisateur Page 50