EverFocus EMV200 DVR Manuel d'utilisateur télécharger pdf (Page 71)

5.7 Simple One to One Connection

Crossover Ethernet Cable Pin outs:

The Figure below shows the pin configurations for a cross-over cable.

Connection Procedure:

 The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have

never made a cross-over cable. Please remember you can not use a straight through network cable for

this application

 Once you have a cross-over cable plug one end into the LAN port on the back of the DVR and the other

into the network card on the back of the computer.

 Log into the EverFocus DVR menu and go to the Network Setting Menu.

 You must use the Static IP option for this type of connection.

 Assign an IP of 192.168.001.003, a Subnet Mask of 255.255.255.000, and a Gateway of

192.168.001.001. You can ignore DNS Server.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 101 102

Pas de commentaire

EverFocus EMV200 DVR Manuel d'utilisateur Page 71