EverFocus Flex1.0 Manuel d'utilisateur télécharger pdf (Page 19)

EverFocus Navigation Access Control Management Software



2 Operation instructions of the software

This chapter will guide you how to quickly set up a controller through the software as the identity of

a Super Admin and use this controller to open the door by using this card and record the

attendance. Please familiarize yourself with this software according to the procedure below. For a

more comprehensive understanding of the usage of the software, please refer to the introduction of

the related functions in corresponding chapters.

2.1 Quick start

2.1.1 Add and configure the access system controller

Click the menu bar “Access Rule” “Controller Management”  “Controller Settings” to enter into

the controller Setting page. The contents below will show you how to add a controller (refer to P42,

4.1.2 “Add a controller” for the detailed settings) to the system.

Operating procedure:

1) Click the “Add” button, fill in the information of controller address, port, type and its location.

2) Please confirm that the controller to be added has been already online firstly.

3) Click the “Add” button, then the software starts to “search” the controller and add to system.

2.1.2 Set the rules of the access system

2.1.2.1 Date setting

Click the menu bar “Access Rule” “Access Management”  “Date Setting” to enter into the date

setting page. The contents below will show you how to add a date (refer to P524.2.1.1 “Add a date”

for the detailed settings).

Operating procedure:

1) Click “Add” button.

2) Select the recurrent type, date and date type, and click the “save” button.

3) If the controller is not online now, the setting will be saved in the database. After the controller

gets online, you need to download the setting to the controller manually.

2.1.2.2 Door schedule setting

Please set the door schedule setting firstly, and then enter into the door setting to assign the

schedule for each door. Click the menu bar “Access Rule” “Access Management”  “Door

Schedule Setting” to enter into the setting page of door schedule setting. The contents below will

show you how to add a door schedule (refer to P58, 4.2.4.1 “Add door schedule” for the detailed

settings).

Operating procedure:

1) Click the “Add” button.

2) Input the name of the new schedule in the pop-up dialog box, and click the “Save” button to

generate a new schedule.

3) Click the “Door control schedule setting” button in the operation column, set the time section

and door authentication method in this page, save the setting and then close this page.

2.1.2.3 Door setting

Click the menu bar “Access Rule” “Access Management”  “Door Setting” to enter into the door

setting page. The contents below will show you how to set a schedule for a door (refer to P60, 4.2.5

Chapter

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 139 140

Commentaires sur ces manuels

Pas de commentaire

EverFocus Flex1.0 Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité EverFocus Flex1.0