EverFocus Flex1.0 Manuel d'utilisateur télécharger pdf (Page 59)

e. Repeat a, b, c and d to setup all the time zones and verification levels for

this date type.

3. Repeat 1 and 2 to set more door access rules for all the date types.

Tip: If two date types are about to have the same door access setting, the system

provides a shortcut setting scheme by using the “copy” and “paste” buttons.

Take date type II and type III as an example, whose door access setting are of the

same. Now we have type II done and type III intact. Here are the steps to use

“Copy” and “Paste” buttons:

a. Choosing “Type II” date type by clicking the button of “Type II”

b. Click the button “Copy” shown as 4 in Fig. 7.1

c. Choose the date type by clicking the button of “Type III”

d. Click “Paste”. Then the access authority of “Type III” will be set as the same

as the one of “Type II”.

By repeating the instructions from “select a controller” and “select a door”, the door

access setting for all the doors controlled by all other controllers can be accomplished in

the same way.

“Apply to days” Shortcut

If one or more days are to have the same authority settings, there is a short cut provided

in the software.

For example, say the user wants to take the access authority settings that have been

assigned to Monday, and apply them to other days of the week. The user should:

a. Choose “Monday” by clicking the button for “Monday”

b. Click the “Apply to days” shown in point 4 in Fig. 7.1. A new box will appear.

c. Click the box corresponding to the days to which the “Monday” settings are to

be applied.

d. Click on Apply to change the access times of the days.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 122 123

Pas de commentaire

EverFocus Flex1.0 Manuel d'utilisateur Page 59