EverFocus Flex1.0 Manuel d'utilisateur télécharger pdf (Page 67)

Close button: press this button to close card management dialog box and go back

to the main window.

Basic Steps for Setting up Cardholder Database

When setting up a cardholder database in a new system, users should follow the steps

below:

1. Determine which cards should be registered in which controllers (applicable

only when the system has multiple controllers).

2. Register cards (manually or automatically).

3. Edit cardholder profiles.

4. Edit card(s)’ access attributes.

The details of each step will be addressed in the following sections.

Each cardholder must posses a valid, registered card. It is important to register each

card in the database correctly, to ensure proper operation. There are three ways to

Note: before registering cards, determine to which controller each card will be assigned.

Figure 8.4 Card manual register dialog

The steps to register cards manually are described as below:

1. As shown in Figure 8.4, press

2. Type in the card number to be registered. This is the 8 digit number printed on

the card. Press

to confirm. This card number will be added in the

Cardholder’s personal profile database.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 122 123

Pas de commentaire

EverFocus Flex1.0 Manuel d'utilisateur Page 67