EverFocus Flex1.0 Manuel d'utilisateur télécharger pdf (Page 77)

1. At the uneditable mode of card management dialog, select the desired

cardholder from the cardholder list.

2. Select the desired controller from the list. For example, in Fig. 8.18, controller

0001 is selected.

3. Click the edit button

in the toolbar for card access attributes to bring up

the card access attribute dialog box as in Figure 8.19.

Figure 8.19 Card access attributes dialog box

4. Edit the access attributes in the dialog. The details of the operation are given in

the next subsection.

5. Click “OK” to .confirm the editing and close the dialog. The desired settings

will be transmitted to the controller and stored in database. Click “Cancel” to

discard the changes and exit.

6. Repeat steps 2 to 5 to set the card access attributes on all the controllers that the

card is applied to.

Card Access Attributes Dialog

Refer to the dialog sample in Fig. 8.19, basic information about the cardholder such as

Employee No., Card No. and Name are shown in the upper part of the dialog box.

These information are set when setting up the cardholder personal profile and cannot

be changed here.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 122 123

Pas de commentaire

EverFocus Flex1.0 Manuel d'utilisateur Page 77